There are many reasons why SD card is not detected on Windows 10. If you are experiencing the same issue, you have to exclude the cases one by one to solve this problem. Never hesitate to restart your computer. Most of the time, it settled question. As for unsolved situation, six solutions are provided below to work out the trouble of (micro) SD card not showing up on Windows 10.
1. Try SD Card on Another Device
Go to your laptop manufacturer website. Dell users can go here, hp users can go here, Toshiba users.
- As a result, the drive may have been mapped; however, the user on client cannot see it in Windows Explorer. He may recognize it as a failed network drive mapping. This is the reason why we usually suggest you to disable fast logon on the clients via a GPO, and please check if the mapped network drive will be occur under this circumstance.
- System and user certificates might be lost when updating a device from Windows 10, version 1809 or later to a later version of Windows 10. Devices will only be impacted if they have already installed any Latest cumulative update (LCU) released September 16, 2020 or later and then proceed to update to a later version of Windows 10 from media or an installation source which does not have an LCU.
Sometimes it is the computer interface that breaks, rather than SD card. In this case, just connect your SD card to another computer or Android phone. Alternatively, try another SD card to check the interface. There is no shortcut if you want to test the SD card not recognized or working on Windows 10.
2. Check SD Card in Disk Management
If your SD card doesn't show up in Windows 10 File System, but in Disk Management, check whether there is a drive letter for the card. Follow the steps below to add a drive letter:
- Step 1. Right click 'My Computer' and select 'Disk Management'.
- Step 2. In Disk Management, your SD card will appear as a removable disk. Check if it has a drive letter like D or E.
- Step 3. If not, right click the SD card and select 'Change Drive Letter and Paths'.
- Step 4. Click 'Add' and select a drive letter, then click 'OK'. Your SD card would be working in File System along with local disks.
3. Remove SD Card Write Protection
There is a knowledge point that write protected SD card will not be displayed on other devices, except the original one. So if you did lock your SD card before, the first thing is to remove write protection from SD card. Check the lock switch beside the card or use disk utility. It can also fix SD card not showing up on Windows 10.
4. Undo Recent Changes
If the SD card is not detected in your computer after installing a new program or system build, then you may roll back your computer to the previous status. A few programs, especially some system utilities, are known as the villains of SD card not showing up problem. You can remove the newly-installed programs to see if the problem still exists. Or, check it Safe mode.
If you believe the program is caused due to a recent system build update, it may be a little troublesome to roll back to a previous version. As an alternative solution, you're suggested to update SD card driver first which may be out of date after the system update.
5. Reinstall/Update SD Card Driver
When you update Windows 10, it will automatically renew all device drivers. But if you still have problem with a device, it is still well worth a try to update or reinstall the driver. Here's how to update/reinstall driver to repair (micro) SD card not detected on Windows 10:
- Step 1. Click 'Start' and enter 'Device Manager'. Select it from the results.
- Step 2. Find your SD card and right click it, then select 'Update Driver'.
- Step 3. Select 'Search automatically for updated drive software'. If there is no new driver, try to look for one on the manufacturer's website and follow the installation wizard.
- Step 4. If it doesn't work to update driver, just right click the device and select 'Uninstall'. Then restart your computer, and Windows will reinstall the driver by itself.
6. Enable SD Card Reader
Disabled SD card will not show up on Windows 10. The steps to enable this function are the same as above. First, find your SD card in 'Device Manager' and right click it. If it shows 'Disable Device', then you have already enabled SD card reader and there is no need to do anything. If not, just select the option 'Enable Device'. Then Windows 10 could detect your SD card normally. In case it doesn't, try to enable several related services in your computer as described below.
Enable related services:
- Press Windows + R key, then type SERVICES.MSC in Run dialogue and hit Enter.
- Locate each of the services, right-click on them and choose Properties, then make them automatic in Startup mode:
- Human Interface Device Access
- Plug and Play
- PNP-X IP Bus Enumerator
- Shell Hardware Detection
- Storage Service
- UPnP Device Host
Restart your computer and then check if the problem is fixed or not.
7. Run Hardware and Device Troubleshooter
Troubleshooter is a built-in repair tool in Windows 10. It helps to fix common computer problems. You can also use it to solve (micro) SD card not detected on Windows 10 problem.
- Step 1. Click 'Settings'> 'Update & security'> 'Troubleshooter'.
- Step 2. Select 'Hardware and Devices', then click 'Run the troubleshooter'. After detecting the problem, the troubleshooter will fix it automatically.
8. Force Clear Undetected SD Card
If you have tried everything but all are invalid, you may have to force clear the SD card and set it up again. Please note that you will lose all the files stored in the memory card, which could be permanent.
- Step 1. Click on Start menu, type 'CMD', then right-click on Command Prompt and choose Run as administrator.
- Step 2. In Command Prompt (Administrator), type the following lines and hit Enter one by one.
- diskpart
- list disk
- select disk # (replace # with the number of the SD card. You can judge by memory size)
- attributes disk clear readonly
- Step 3. When you see 'Disk attributes cleared successfully' message, close Command Prompt.
Restart your computer, remove and reinsert the SD card, and check if the problem is solved.
Write In the End:
Accidentally deleted or lost important photos, videos and music on your SD card? Don't worry. Just try RePicvid Free Photo Recovery to help you recover deleted files from SD card with simple clicks. This software offers 'Advanced Settings' for better user experience. Also, you're allowed to preview the recoverable files one by one. For detailed steps, please refer to how to recover deleted photos/videos from SD card.
Related Articles
If your SD card doesn't show up in Windows 10 File System, but in Disk Management, check whether there is a drive letter for the card. Follow the steps below to add a drive letter:
- Step 1. Right click 'My Computer' and select 'Disk Management'.
- Step 2. In Disk Management, your SD card will appear as a removable disk. Check if it has a drive letter like D or E.
- Step 3. If not, right click the SD card and select 'Change Drive Letter and Paths'.
- Step 4. Click 'Add' and select a drive letter, then click 'OK'. Your SD card would be working in File System along with local disks.
3. Remove SD Card Write Protection
There is a knowledge point that write protected SD card will not be displayed on other devices, except the original one. So if you did lock your SD card before, the first thing is to remove write protection from SD card. Check the lock switch beside the card or use disk utility. It can also fix SD card not showing up on Windows 10.
4. Undo Recent Changes
If the SD card is not detected in your computer after installing a new program or system build, then you may roll back your computer to the previous status. A few programs, especially some system utilities, are known as the villains of SD card not showing up problem. You can remove the newly-installed programs to see if the problem still exists. Or, check it Safe mode.
If you believe the program is caused due to a recent system build update, it may be a little troublesome to roll back to a previous version. As an alternative solution, you're suggested to update SD card driver first which may be out of date after the system update.
5. Reinstall/Update SD Card Driver
When you update Windows 10, it will automatically renew all device drivers. But if you still have problem with a device, it is still well worth a try to update or reinstall the driver. Here's how to update/reinstall driver to repair (micro) SD card not detected on Windows 10:
- Step 1. Click 'Start' and enter 'Device Manager'. Select it from the results.
- Step 2. Find your SD card and right click it, then select 'Update Driver'.
- Step 3. Select 'Search automatically for updated drive software'. If there is no new driver, try to look for one on the manufacturer's website and follow the installation wizard.
- Step 4. If it doesn't work to update driver, just right click the device and select 'Uninstall'. Then restart your computer, and Windows will reinstall the driver by itself.
6. Enable SD Card Reader
Disabled SD card will not show up on Windows 10. The steps to enable this function are the same as above. First, find your SD card in 'Device Manager' and right click it. If it shows 'Disable Device', then you have already enabled SD card reader and there is no need to do anything. If not, just select the option 'Enable Device'. Then Windows 10 could detect your SD card normally. In case it doesn't, try to enable several related services in your computer as described below.
Enable related services:
- Press Windows + R key, then type SERVICES.MSC in Run dialogue and hit Enter.
- Locate each of the services, right-click on them and choose Properties, then make them automatic in Startup mode:
- Human Interface Device Access
- Plug and Play
- PNP-X IP Bus Enumerator
- Shell Hardware Detection
- Storage Service
- UPnP Device Host
Restart your computer and then check if the problem is fixed or not.
7. Run Hardware and Device Troubleshooter
Troubleshooter is a built-in repair tool in Windows 10. It helps to fix common computer problems. You can also use it to solve (micro) SD card not detected on Windows 10 problem.
- Step 1. Click 'Settings'> 'Update & security'> 'Troubleshooter'.
- Step 2. Select 'Hardware and Devices', then click 'Run the troubleshooter'. After detecting the problem, the troubleshooter will fix it automatically.
8. Force Clear Undetected SD Card
If you have tried everything but all are invalid, you may have to force clear the SD card and set it up again. Please note that you will lose all the files stored in the memory card, which could be permanent.
- Step 1. Click on Start menu, type 'CMD', then right-click on Command Prompt and choose Run as administrator.
- Step 2. In Command Prompt (Administrator), type the following lines and hit Enter one by one.
- diskpart
- list disk
- select disk # (replace # with the number of the SD card. You can judge by memory size)
- attributes disk clear readonly
- Step 3. When you see 'Disk attributes cleared successfully' message, close Command Prompt.
Restart your computer, remove and reinsert the SD card, and check if the problem is solved.
Write In the End:
Accidentally deleted or lost important photos, videos and music on your SD card? Don't worry. Just try RePicvid Free Photo Recovery to help you recover deleted files from SD card with simple clicks. This software offers 'Advanced Settings' for better user experience. Also, you're allowed to preview the recoverable files one by one. For detailed steps, please refer to how to recover deleted photos/videos from SD card.
Related Articles
Please enable JavaScript to view the comments powered by Disqus.Is your Microsoft wireless display adapter not connecting? Are you facing numerous issues with the adapter? Sometimes, the answer may be simple, and we hope it is in your case but other times, it could be complicated. However, before you panic, it is important to try Microsoft wireless display adapter troubleshooting yourself. If all fails, you can talk to the professionals.
How To Fix Microsoft Wireless Display Adapter not Connecting?
Here, we have compiled a series of troubleshooting options that you could go with when your Microsoft wireless display adapter doesn't connect:
Option-1: Make sure it is connected right
As aforementioned, sometimes the solution is very simple. It is possible that you didn't connect your adapter correctly. Try disconnecting it from both ends and reconnecting it. Remember, the adapter works through the USB port, and this must be connected. The other end, of course, is plugged into the HDMI port of your device (monitor, TV, projector, etc.) You might need a USB extension cord if the length is not enough.
An introduction to medical statistics martin bland pdf. Here, you should remember that MS wireless display adapter won't connect to Android devices. Only the new adapted connects to a few Android devices. So, if you have an Android device, make sure it is compatible.
Option-2: Is your device updated?
If the connections seem fine and you are still facing issues, maybe there are other problems.
Now, another simple reason could be that your Windows 10 device isn't updated. So, you should quickly just take a look at the available updates for Windows and make sure your device isn't lagging behind.
Remember, once you install the updates you will have to restart your device for the updates to reflect.
Option-3: Switch the adapter off and back on
A simple restart of the adapter can make things fall into place. If you haven't tried it already, please do so!
Option-4: Reset Microsoft wireless display adapter
Windows Cannot Start Mapping On The Adapter Not Connected Router
Near the wired connection on the adapter, you will see a small reset button. Press it and hold for around 10 seconds or until the LED light blinks.
Once the device is ready to connect (you will receive a message) you should go to the Action Center and choose Connect to select Microsoft wireless display adapter.
Option-5: Is the firmware updated?
If the device is connecting fine, but on the second screen, you don't see what's on your device, your firmware probably needs to be updated.
Simply download the MS wireless display adapter app if you haven't already done it and check the settings. Install the new firmware update, and you will see instructions on the screen that you can follow without second thoughts.
Option-6: The wireless frequency band may not be in sync
2.4 GHz and 4GHz are the only two frequencies on which the adapter can communicate. However, the 2.4GHz band has to be enabled at all times. Check if it is disabled on your device.
Option-7: Your Windows 10 Intel HD Graphics driver may be at fault
If none of the above suggestions has worked in your favor and your Microsoft wireless display adapter won't connect even now, you might have to think about your Intel HD graphics driver. Any fault in this will also prevent proper connection.
Uninstall your driver and install it back again to see if this works for you.
Option-8: Your Wi-Fi driver may also be at fault
If your graphics driver is fine, you might want to check your Wi-Fi driver. Uninstall and reinstall it to see if that works.
Windows Cannot Start Mapping On The Adapter Not Connected Wirelessly
Anything else?
Windows Cannot Start Mapping On The Adapter Not Connected Across
If all your Microsoft wireless display adapter troubleshooting solutions do not work and your Windows 10 wireless display is not working even now, you may need to call professionals to help you out. Make sure you call only certified professionals.
